Related products

Can be used with the Quick Change Tool Post for the PD 230/E.

Three sheets, each with 20 pads (5 each of the four shapes, self-adhesive)

Carrier band in alloyed heat-treated steel.

Swedish steel.

Swedish steel.

Swedish steel.

Used for highest accuracy with high rotational precision.

As described for the MICRO Miller FF 230, but excluding headstock and column.

Accessories for wet sanding and cutting os glass, stone and tiles in conjunction with bandsaw MBS 240/E and Disc Sander TG 250/E.

Accessory for wet sanding and cutting of glass, stone and tiles in conjunction with Bandsaw MBS 240/E and Disc Sander TG 250/E.

Spare discs for the SP/E and BSG 220 (50 x 30mm)

For cutting stone, ceramic, glass and PC cards.

For lathe PD 230/E, Micro Miller PF 230 & FF 230

With 10mm arbor for mill/drill unit.

With sliding sleeve for the tailstock of the DB 250!

For V-shaped letters.

Code 28765

Includes 1 diamond bit (spherical head 1.8mm)

Fine feed for accurate adjustments!

Easily installed in a few seconds!

For soft and hard wood, plastic, Plexiglas and soft NF metals.

Supplied in a wooden box with sliding lid.

Neatly packed in a wooden box.

Used when turning long, slender pieces.

Capacity of 80mm.

Capacity to 10mm with key and MK1 for tailstock.

Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

Also available is the UH 34 Universal Holder. The suction food ensures rapid fixing to smooth surfaces.

Converts the PD 230/E Lathe into a complete machining centre.

Kit includes the mounting flange and screws (the mounting surface on the PD 400 is already machined).

Also available is the Precision Vice FMS 75,  but without clamp. A strong suction cup facilitates instantaneous fixing to any smooth, flat surface.

With burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron.

Corundum on tear-resistant, woven backing.

Corundum on tear-resistant, woven backing.

Corundum on tear-resistant, woven backing.

Pair of replacement blades

Ceramic compound 50 x 1 x 10mm. 50% aluminium oxide/50% silicon carbide. For separating steel & NF metals. Also suitable for cutting small-sized wood & ceramic rods.

Solid Carbide Stylus for extremely hard materials!

Code 28160  80 grit x 5 discs

Code 28162  150 grit x 5 discs

Code 28164    240 grit x 5 discs

80 grit x 5 discs

150 grit x 5 discs

240 grit x 5 discs

320 grit

Suitable for Lathe PD 230/E and the Dividing Attachment 24131.

Spare discs for the SP/E and BSG 220 (50 x 30mm). Soft compound for very hard materials.

Used on the Thermocut and other similar units. Made of NiCr 8020. Spool of 30m x 0.2mm.

120 grit  x  5 pieces

180 grit x 5 pieces

240 grit x 5 pieces

80 grit x 5 pieces

Used for concentric clamping.

Includes two holders.