ProxxonDirect.com :: MICRO Miller FF 230

Products > Milling Systems > MICRO Miller FF 230 > Fine Feed for Milling Machine PF 230 & MICRO Miller FF 230 > MICRO Miller FF 230

MICRO Miller FF 230

The headstock swivels through 360° indicated on a scale. Adjustment via hand wheel and dial (1 revolution = 1 mm, 1 division = 0.05 mm). Acts additionally as fine feed when milling or precise drilling. Quill and headstock may be locked in position, essential when milling. The powerful permanent magnet motor effects drive via a poly-v belt, yielding high torques, especially at lower speeds. Collets of 6, 8 and 10 mm are included. The solid steel table is T-slotted to the MICROMOT norm of 12 x 6 x 5 mm.

* Hand wheel for height adjustment and optional as fine feed for use when milling or precise drilling.

• Poly-V belt drive for 6 spindle speeds 280 - 2,500 rpm.

• Assembled fine feed, work piece, clamp set and cutters not included.

• Hand wheels with adjustable scale (1 revolution = 1 mm, 1 division = 0.05 mm).

Technical Data:

220 - 240 V. 140 W. 50/60 Hz. Spindle speeds: 280 - 550 - 870 - 1,200 - 1,500 and 2,200 rpm are achieved by poly-v belt drive. Quill travel 30 mm. Column 35 x 400 mm. Table 270 x 80 mm. Travel X (cross) 170 mm, Y (length) 65 mm. Size 180 x 130 mm. Total height approx. 500 mm. Weight approx. 17.0 kg.

Related products

Compound Table KT 230

As described for the MICRO Miller FF 230, but excluding headstock and column.

24106

Five Piece Collet Set for PF 230 & FF 230

Supplied in a wooden box with sliding lid.

24144

Fine Feed for Milling Machine PF 230 & MICRO Miller FF 230

Easily installed in a few seconds!

24140

Step Clamp Set, milled steel

May be used with PD 230/E, PF/FF 230, PD 400, PF/FF 400, Face Plate 24412 & KT 150.

24257

Step Clamp Set

For the safe fixing of small workpieces to the MICRO-milling cutter MF 70, the MICRO co-ordinate table KT 70, the fine milling cutters FF 230 and FF 400, the milling table for the milling fixtures PF 230 and PF 400 and the cross tables KT 230 and KT 400.

24256

Precision V-blocks (two pieces)